VTC既產品設計課程可行嗎?

有關 Product Design 行業的CG應用

版主: Siegfried

文章kl12 » 15日 11月 2005年, 09:56

喂,版主,我又有問題啦,如果我而家去take既cause系關於pro-e,會唔會有用呢,最緊要系而家公司請產品設計師要求系咩呢?
頭像
kl12
討論區新秀
討論區新秀
 
文章: 94
註冊時間: 24日 7月 2004年, 17:22
來自: H.K.

文章Siegfried » 15日 11月 2005年, 15:05

kl12 寫:喂,版主,我又有問題啦,如果我而家去take既cause系關於pro-e,會唔會有用呢,最緊要系而家公司請產品設計師要求系咩呢?


It's weird to find that most designer nowadays in HK are software operater at the same time, that is, u can be a designer if u know how to operate a software, but not vice versa..pathetic.

Pro-E is an engg. software, but it can also be used on product design, but the result and process are rather :lol: ...that depends on what kind of rendering and work-flow u prefer. But mastering one more software is better than nothing, regardless to how good your design talent is.

Most PD in HK, requires u to have a degree/HD in design field, exp and talent are rather important as these are valuable asset for designers. Software are just tools, don't focus on it too much. :mrgreen:
生死去來 樹頭傀儡
一線斷時 落落磊磊
頭像
Siegfried
討論區主持
討論區主持
 
文章: 960
註冊時間: 7日 4月 2002年, 08:00
來自: 星之大海

上一頁

回到 Product Design

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 1 位訪客

cron