Ring test

有關 Product Design 行業的CG應用

版主: Siegfried

Ring test

文章Siegfried » 14日 1月 2005年, 16:19

This ring was modelled in Rhino and rendered in Flamingo. Just a small test. :oops:
Also, I add some fake DOF in PS, not a good move...
附加檔案
ring.jpg
ring.jpg (112.1 KiB) 被瀏覽 20461 次
生死去來 樹頭傀儡
一線斷時 落落磊磊
頭像
Siegfried
討論區主持
討論區主持
 
文章: 960
註冊時間: 7日 4月 2002年, 08:00
來自: 星之大海

Share On:

Share on Facebook Facebook Share on Twitter Twitter

文章choppy » 14日 1月 2005年, 17:53

已經很正了!!!!
我覺得高光暗左o的.
永遠的巨石3D動畫制作團隊
http://www.longlastingrock.com/phpbb/index.php
頭像
choppy
CGV討論區會員
CGV討論區會員
 
文章: 795
註冊時間: 28日 2月 2002年, 08:00
來自: 香港

文章h2o » 14日 1月 2005年, 23:33

好正, 不過鑽石點解唔 ren 真 model 呀, 用 mapping 差d :mrgreen:
FB
My Lab
CG guy + Researcher + Educator
頭像
h2o
討論區主持
討論區主持
 
文章: 4945
註冊時間: 7日 4月 2002年, 08:00
來自: Dark Side
外號: 水水

文章badBoy » 15日 1月 2005年, 17:53

cool! look forward to c more post from u~ :mrgreen:
badBoy
CGV討論區會員
CGV討論區會員
 
文章: 142
註冊時間: 13日 8月 2001年, 08:00

文章Siegfried » 16日 1月 2005年, 01:28

choppy 寫:已經很正了!!!!
我覺得高光暗左o的.


As I'd prefer low-profile rendering :wink: but thanks for your comment !!! :P :P :P
生死去來 樹頭傀儡
一線斷時 落落磊磊
頭像
Siegfried
討論區主持
討論區主持
 
文章: 960
註冊時間: 7日 4月 2002年, 08:00
來自: 星之大海

文章Siegfried » 16日 1月 2005年, 01:31

h2o 寫:好正, 不過鑽石點解唔 ren 真 model 呀, 用 mapping 差d :mrgreen:


yes ar...Flamingo is pretty weak at manual control of shadowing, lighting and raytracing (object exclude etc )....and this rendering takes just a couple minutes for calculation, so the quality is compromised... :mrgreen:
生死去來 樹頭傀儡
一線斷時 落落磊磊
頭像
Siegfried
討論區主持
討論區主持
 
文章: 960
註冊時間: 7日 4月 2002年, 08:00
來自: 星之大海

文章Siegfried » 16日 1月 2005年, 01:32

badBoy 寫:cool! look forward to c more post from u~ :mrgreen:


OK, a promise is a promise ! :mrgreen: Your comments are always welcomed. :P
生死去來 樹頭傀儡
一線斷時 落落磊磊
頭像
Siegfried
討論區主持
討論區主持
 
文章: 960
註冊時間: 7日 4月 2002年, 08:00
來自: 星之大海

文章Siegfried » 17日 1月 2005年, 10:18

Here are some Flamingo Toon Shading, it takes several seconds only for each rendering, in such a resolution.
附加檔案
Ring.gif
Ring.gif (166.11 KiB) 被瀏覽 20307 次
生死去來 樹頭傀儡
一線斷時 落落磊磊
頭像
Siegfried
討論區主持
討論區主持
 
文章: 960
註冊時間: 7日 4月 2002年, 08:00
來自: 星之大海

文章新 Ricky » 3日 5月 2005年, 09:57

Siegfried //

It nice render pix !
My comment is the corner of floor, I also has this problem
always and painful to remove it !!
Looking for position of product designer (electronic consumer product) !!!
http://3designhk.com
圖檔
頭像
新 Ricky
討論區新秀
討論區新秀
 
文章: 24
註冊時間: 14日 4月 2005年, 13:04
來自: SSW

文章Siegfried » 3日 5月 2005年, 17:26

新 Ricky 寫:Siegfried //

It nice render pix !
My comment is the corner of floor, I also has this problem
always and painful to remove it !!


Far corner in the wireframe rendering...here's a solution...
Generate the model wireframe and composite with another infinite grid in PS. :mrgreen:
生死去來 樹頭傀儡
一線斷時 落落磊磊
頭像
Siegfried
討論區主持
討論區主持
 
文章: 960
註冊時間: 7日 4月 2002年, 08:00
來自: 星之大海

文章新 Ricky » 3日 5月 2005年, 20:36

Siegfried 寫:
新 Ricky 寫:Siegfried //

It nice render pix !
My comment is the corner of floor, I also has this problem
always and painful to remove it !!


Far corner in the wireframe rendering...here's a solution...
Generate the model wireframe and composite with another infinite grid in PS. :mrgreen:


yes, I try this method before......... but looks......
I dont know how to say....... I guess some rendering expert
should have another solution.......

below pix is mine, pls comment ar.......!!!
附加檔案
eyewear_5.jpg
eyewear_5.jpg (70.34 KiB) 被瀏覽 20142 次
Looking for position of product designer (electronic consumer product) !!!
http://3designhk.com
圖檔
頭像
新 Ricky
討論區新秀
討論區新秀
 
文章: 24
註冊時間: 14日 4月 2005年, 13:04
來自: SSW

文章Siegfried » 4日 5月 2005年, 09:44

Here's my little thought of your rendering...

If you want the client to focus on the design, then a spot-light is recommended, but at the same time, adequate lighting to show all the detail of the product is necessary, except additional detail drawing is provided.

What's the surface finish of the frame ? Spray or electroplating?
And why don't you rendering one more but have the frame folded?
生死去來 樹頭傀儡
一線斷時 落落磊磊
頭像
Siegfried
討論區主持
討論區主持
 
文章: 960
註冊時間: 7日 4月 2002年, 08:00
來自: 星之大海

文章新 Ricky » 4日 5月 2005年, 10:11

Siegfried 寫:Here's my little thought of your rendering...

If you want the client to focus on the design, then a spot-light is recommended, but at the same time, adequate lighting to show all the detail of the product is necessary, except additional detail drawing is provided.

What's the surface finish of the frame ? Spray or electroplating?
And why don't you rendering one more but have the frame folded?


Siegfried //
haha..........thanks again !
I understood lu....... since this rendering is practice only on
4-5 yrs ago...... and not a design project ( Okaley ) , just train
my skill in modeling and rendering .......
I think u must be very familiar in the finishing / color styling tuning !

Really want to follow u for learning !!! :oops: :oops: :oops:
Looking for position of product designer (electronic consumer product) !!!
http://3designhk.com
圖檔
頭像
新 Ricky
討論區新秀
討論區新秀
 
文章: 24
註冊時間: 14日 4月 2005年, 13:04
來自: SSW

文章Siegfried » 4日 5月 2005年, 10:19

No la, almost 90% of my product (in the company I'm serving) are being sprayed. But for spectacle, I doubt the spray would have an allergy to the skin when it comes to heavy sweating....
生死去來 樹頭傀儡
一線斷時 落落磊磊
頭像
Siegfried
討論區主持
討論區主持
 
文章: 960
註冊時間: 7日 4月 2002年, 08:00
來自: 星之大海

文章新 Ricky » 4日 5月 2005年, 10:33

icic......... now
u mainly for which market ? e/e , watch , eyewear, ......etc? :lol:
Looking for position of product designer (electronic consumer product) !!!
http://3designhk.com
圖檔
頭像
新 Ricky
討論區新秀
討論區新秀
 
文章: 24
註冊時間: 14日 4月 2005年, 13:04
來自: SSW

下一頁

回到 Product Design

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 7 位訪客

cron