有D想學XSI

各XSI / Softimage/Face Robot 用戶可在這裡交流問題和分享制作經驗

版主: HapZungLam

有D想學XSI

文章limitvision » 9日 7月 2010年, 02:00

想問一下XSI的DYNAMIC SYSTEM 勁唔勁?
limitvision
討論區新秀
討論區新秀
 
文章: 44
註冊時間: 16日 12月 2005年, 20:15

Share On:

Share on Facebook Facebook Share on Twitter Twitter

文章HapZungLam » 9日 7月 2010年, 08:42

Besides syflex is pretty easy to use. everything else is just bad.
頭像
HapZungLam
討論區主持
討論區主持
 
文章: 1143
註冊時間: 30日 8月 2001年, 08:00
來自: Vancouver

文章limitvision » 10日 7月 2010年, 05:21

HapZungLam:
thx HapZungLam, 我系maya 用戶, 睇中左xsi的face robot 同syflex 這兩個功能, 不知有沒有一學的價值尼, maya 中有冇類似功能, 有個軟件叫 tsm和face robot有d似, 佢足唔足夠應付倒? maya 中有ncloth但聽說不太易上手
limitvision
討論區新秀
討論區新秀
 
文章: 44
註冊時間: 16日 12月 2005年, 20:15

文章HapZungLam » 12日 7月 2010年, 17:06

Just go ahead and learn it.

http://softimage.wiki.softimage.com/ind ... ing_Movies

You can probably learn it with-in a day or 2

Don't hesitate on learning new things. Internet is a great resource on learning 3D. Unlike 15 years ago when I was trying to get into 3D the resources were so limited at the time.

Recently I just learned the Maya rigid body on youtube over the weekend. It was fun.
頭像
HapZungLam
討論區主持
討論區主持
 
文章: 1143
註冊時間: 30日 8月 2001年, 08:00
來自: Vancouver

文章limitvision » 14日 7月 2010年, 03:25

真系多謝曬, 咁我唔客氣了XDDD
limitvision
討論區新秀
討論區新秀
 
文章: 44
註冊時間: 16日 12月 2005年, 20:15


回到 Autodesk Softimage

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 8 位訪客

cron